Modicon Quantum PLC 140 Series CPU Programming Cable

Description

A Quantum PLC Programming Modbus Cable for programming/troubleshooting for the following CPUs; 140 CPU 113 02, 140 CPU 113 02S, 140 CPU 113 02X, 140 CPU 113 03, 140 CPU 113 03S, 140 CPU 113 03X, 140 CPU 213 04, 140 CPU 213 04S, 140 CPU 213 04X, 140 CPU 424 0X, 140 CPU 424 0XX, 140 CPU 434 12, & 140 CPU 534 14.
The cable includes 2 adapters, and one 14ft Ethernet cable.   One Male DB9 to RJ45(which connects to the CPU), and one Female DB9 to RJ45(which connects to your laptop’s DB9 serial port).  If your laptop doesn’t have a DB9 serial port than use a USB to Serial Adapter Cable which will provide the DB9 serial port.  The RJ45 Ethernet Cable is a straight through cable, and can be replaced by any straight through cable for additional length (not to exceed 50ft).; The cable must be a straight through meaning pin 1 to pin 1 through pin 8 to pin 8.    The setup of this cable reduces the quantity of cable gear you carry.  I personally carry one straight through Ethernet cable and the two Adapters in a separate pouch in my laptop case.  When I am plugging into the Ethernet network switches, I use my Ethernet cable.  When I need to connect to a Quantum Plc, I just pull out my two adapters, connect them to my Ethernet cable, and plug right in to the Plc’s CPU!  You will enjoy this quick setup and easy storage.   Each cable is tested before being shipped.  This product is not made by Schneider Electric.  I personally make each cable and provide my personal email to each buyer if technical assistance is needed with connecting using Proworx or Concept.