Z109REG2-1 | Analog / Universal Converters | SENECA

Description

High performance universal converter, programmable via MicroUSB/App
The Z109REG2 module acquires an universal input signal, converts it to an analog format and send it to an universal isolated output.
Specifications:
Universal Input: current, thermocouples, thermoresistances, potentiometer, rheostat.
Measurement and re-transmission on osolated analog output, with voltage and current output.
DIP-switvh for selecting: type of input, START-END, output mode.
front panel indicating: power on, off scale or setting error and alarm status. .
Relay output, programmable through a PC.
3-point insulation:1500V
To see a comparison table of similar products, click
here.
Specifications
GENERAL DATA
Power supply
10..40 Vdc; 19..28 Vac
Power Transducers
Active input @ 2 wires (min 20 Vdc)
Power Consumption
2,5 W (max) - 1,6 W (24 Vdc, 20 mA
Isolation
3.750 Vac (power supply / input / output)
Protection
Against pulse overvoltages: 400 W /ms
Protection degree
IP20
LED status indicators
Power Supply - Error - Alarm
Response time
35 ms (11 bit)..140 ms (16 bit) 35
Interfaces
Micro USB
Accuracy class
0,10%
Thermal drift
0.01%/K
Linearity
0,05% / 0.4%
Setting
DIP switch - Software (EASY SETUP) - App (EASY SETUP)
Operating temperature
-20..+60°C
Dimension
17,5 x 100 x 112 mm
Connessioni
Screw removable terminals 2,5 mm2
Enclosure
Nylon 6 with 30% fiber glass
Mounting
Guida DIN 35 mm (IEC/EN 60175)
Weight
200 g
Approvals
CE, UL
Norms
EN 61000-6-4, EN 61000-6-2, EN 61010-1
INPUT DATA
Channels
1 analogico, 1 strobe
Type
VOLTAGE (mV, V): Bipolar from 75 mV to 20 V, resolution 15 bit + sign
CURRENT (mA): Bipolar up to 20 mA, resolution 1 µA
RTD: Pt100, Pt500, Pt1000, Ni100, KTY81, KTY84, NTC; 3-4 wires measure; scalw: -200..600 °C, resolution 0,1°C
THERMOCOUPLE: Type J, K, R, S, T, E, B, N,
Resolution 2,5 µV
POTENTIOMETER: 500 O ..10 kO
RHEOSTAT: 500 O..25 kO
STROBE: Alternative to output relay
OUTPUT DATA
Channels
1 analog, 1 relay output
Type
VOLTAGE (V): 4 scales: 0/1..5V, 0/2..10V, Min load resistance: 2 kO
CURRENT (mA): 2 scales: 0/4..20 mA, Max load
resistance: 600 O
RELAY: alternative to strobe input NC / NO in case alarm